注：你正在编辑的一份前提条件指南。你所做的任何更改将影响包括此步骤的4指南。
正翻译步骤 4
步骤 4
Remove the USB enclosure
-
Use your fingers to slide the USB board enclosure out from under the metal clip securing it to the shell.
-
Remove the enclosure.
-
Make sure the Pair button is properly oriented and fully inserted in its slot.
-
Firmly slide the enclosure into position until it snaps into place under the metal clip.
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。