注：你正在为你刚才查阅的指南编辑前提条件。你所做的任何更改将影响包括此步骤的5本指南。
正翻译步骤 19
步骤 19
Unscrew the front sensor connector cover
-
Use a Y000 screwdriver to remove two 1.1 mm screws from the front sensor connector cover.
-
Use a Phillips screwdriver to remove the remaining two screws from the front sensor connector cover:
-
One 1.5 mm screw
-
One 1.8 mm screw
您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。