Xbox 360 HDD Replacement

下一步

正翻译步骤 1

英语

中文

步骤 1

Xbox 360 HDD Replacement: 步骤 0 中的图像 1，3

Xbox 360 HDD Replacement: 步骤 0 中的图像 2，3

Xbox 360 HDD Replacement: 步骤 0 中的图像 3，3

Here it is. The standard 20GB HDD for the Xbox 360.
Notice the proprietary adapter. Inside is just a pretty standard 2.5" SATA drive...
I took these pictures as I was putting it back together, hence the Microsoft warranty sticker looking a little funny.
You may also notice the screw in the bottom left is partly out. This is because as I was replacing the screw before it, I broke my bit. I was using a 1/16" flathead bit (I don't have a T6 Torx) and used just a little too much torque and it snapped. I found another 1/16" bit to finish, but didn't get a pic.
If you have Torx bits/drivers, use them. They will work much better than the flatheads.

您的所有投稿皆享有基于开源创作共享许可协议（CC BY-NC-SA）的著作权利。